hank.gif (2680 bytes)

Refrigerated Compressed Air Dryers

Compressed Air Treatment

Refrigerated Compressed Air Dryers by Hankison International


 Refrigerated Dryers | Desiccant & Membrane Dryers | Filters, Purifiers, Accessories

HPR Series

Click on Pricing for Special ACP Pricing on selected Items

Call 1-800-394-5575

Call 1-800-394-5575 or e-mail gwalski@air-compressor.com

View Product Cataloge

HPR Series
Non-cycling Refrigerated Air Dryers 5 to 500 scfm
HPR Series Refrigerated Air Dryers Improve Productivity
Hankison delivers the right solutions for compressed air treatment. HPR Series non-cycling refrigerated compressed air dryers offer the right combination of technology and simplicity to keep your air system at a dry, 38°F (+3°C) pressure dew point, from 5 through 500 scfm. All HPR Series dryers are built for durability, in a space-saving design. Sturdy sheet steel is formed and protected by an epoxy-based powdercoat finish. Reliable reciprocating refrigeration systems use environmentally friendly R-134a refrigerant. R-134a is known for its ability to maintain stable temperatures to protect the integrity of the 38°F (+3°C) pressure dew point. HPR Series can handle the pressure.

Models HPR5-10 through HPR50 Feature:

  • Integral Moisture Separator
  • Timer operated drain with isolation valve/strainer (float drain on HPR5-10
  • Models HPR5-10 and HPR15 designed to adapt to legacy Hankison HVAC installations
  • On/off switch illuminates when the compressor is on

Models HPR75 through HPR500 Feature:

  • Integral 304 stainless steel heat exchanger, mesh demister and moisture separator for long life
  • Timer operated drain includes isolation valve/strainer to protect valve from rust and scale
  • Panel mounted drain timer controls (HPR200-500)
  • LED style dew point indicator (HPR200-500)
  • Panel filter captures ambient dirt and dust to keep condenser clean (HPR100-500)

HPRplus Series 
AN INTEGRATED DRYER/FILTER/DRAIN PACKAGE

An Integrated Dryer/Filter/Drain package

HPRP 100 $2,285.00
HPRP 125 $2,640.00
HPRP 150 $2,995.00
HPRP 200 $4,045.00
HPRP 250 $4,488.00
HPRP 300 $5,245.00
HPRP 400 $6,488.00
HPRP 500 $7,388.00
HPRP 750 $9,488.00
HPRP 1000 $11,688.00
HPRP 1500 $15,385.00
HPRP 2000 $18,585.00
HPRP 2500 $22,745.00
HPRP 3000 $26,788.00

Call 1-800-394-5575 or e-mail gwalski@air-compressor.com

  • Reliable dry air: 38°F, 3°C dew point
  • Integral 3 micron cold coalescing filter
  • “No air loss” electric demand drain
  • Energy Management Monitor saves energy
  • “Smart Port” RS232 computer interface
  • CSA certified

Available for immediate shipment 

To view the HPRplus Series features
and specifications Click Here

View Product Catalog

 


HIT Series High Inlet Temperature 

 

Sizes from 20 – 125 scfm
(34 – 213 Nm3/hr) are
available for immediate
shipment.

Allows you to cool, dry, and 
clean your compressed air in one compact package:

Cools —  accepts hot air directly from a compressor up to 180°F, 82°C

Dries — eliminates water from downstream airlines by providing a stable 50°F, 10°C pressure dew point

Cleans — includes an integral 3 micron coalescing filter to remove particulates and oil aerosols

View Product Catalog

Call 1-800-394-5575 or e-mail gwalski@air-compressor.com

 

HIT 25 $1,295.00
HIT 35 $1,598.00
HIT 50 $1,998.00
HIT 75 $2,498.00
HIT 100 $2,935.00
HIT 125 $3,535.00

 


HV & HES Series High Capacity 
Suitable for compressed air installations greater than 2000 scfm, 3400 Nm3/hr, provide consistent dew points of 38°F to 50°F, 3°C to 10°C.

 

All models are constructed with ASME or CE certified pressure vessels.


Hankison-designed and manufactured heat exchangers offer a balanced design for high heat transfer rates and low pressure drops — less than 1 psi, 0.07 bar.

The Hankison designed two-stage separator with integral 3 micron cold coalescing filter maintains efficiency at all flow conditions.

PLC system performs control, fault protection, and alarm functions.

View Product Catalog

Call 1-800-394-5575 or e-mail gwalski@air-compressor.com


HPET Series High Pressure 
 Available with maximum working pressures of 500, 700 and 900 psig; 35, 49 and 63 bar

 

Mandatory product certifications such as CE, CSA, CRN, and ASME are standard for this series.

 
 
HPET 0.33 $2,565.00
HPET 0.5 $3,100.00
HPET 0.75 $4,285.00
HPET 1 $7,585.00
HPET 1.5 $7,995.00
HPET 2.5 $9,285.00
HPET 3.5 $9,985.00
HPET 6 $15,435.00
HPET 10 $16,995.00

Call 1-800-394-5575 or e-mail gwalski@air-compressor.com

 

 Typical applications include:
  • Plastic (PET) bottle manufacturing Injection molding
  • Aeronautical valve and control testing
  • Pharmaceutical testing and packaging

Smooth surface, self-cleaning, copper heat exchangers maintain stable 38°F, 3°C dew points and low system pressure drops for the life of the unit, without requiring a prefilter.

View Product Catalog