|
|
|
Water
vapor passes through permeable membrane walls, lowering
the dew point.
Light
weight units can be installed in piping without additional
support.
Works
without moving parts, consumables or external power
source.
Constructed
of non-rusting parts that are suitable for indoor,
outdoor and severe
environments.
View
Product Catalog
|
HMM
Series Modular Membrane Compressed Air Dryers
The HMM
Series Modular Membrane dryers offer clean, stream lined
installations and reliable operation while providing dew
points from -40°F to +40°F, -40°C to +5°C.
|
|
Water
vapor passes through permeable membrane walls, lowering
the dew point.
Light
weight units can be installed in piping without additional
support.
Works
without moving parts, consumables or external power
source.
Constructed
of non-rusting parts that are suitable for indoor,
outdoor and severe
environments.
View
Product Catalog
|
For more detailed
information regarding the HMM Series dryers, download the
PDF files or request a hard copy.
|
|
|
|
DH
& DHW Series Heatless Regenerative Dryers
|
 
|
Produce
consistent outlet pressure dew points of -40°F and -100°F, -40°C
and -73°C with minimum purge air usage and maximum service life.
DH
Sizes 25 – 2100 scfm, 43 – 3,570 Nm3/hr are available
for immediate shipment.
Dryer
towers are engineered by Hankison to produce a stable dew
point, minimize purge air usage, and protect the desiccant
material.
Patented Sensatherm purge saving system matches purge air
requirements to the demand on the dryer.
Optional mounted prefilter/afterfilter packages remove particulates
and oil aerosols from the air stream and extend the life of
the desiccant.
DHW Dryers are furnished in a cabinet for easy wall mounting
To view the
DH Series features and
specifications Click Here
View
Product Catalog
|
|
|
|
DBP
Series Blower Purge Regenerative
Desiccant Compressed Air Dryer
|
|
The
DPB Series blower purge regenerative desiccant dryers are designed
to achieve a stable -40°F, -40°C dew point while minimizing
energy costs.
Standard
temperature sensing and optional moisture sensing systems
match energy use to demand.
Insulated towers and piping plus efficient heaters and blowers
minimize energy requirements.
Guaranteed outlet dew point at 100% duty cycle.
PLC controller monitors all critical operating conditions,
indicates operating status and fault conditions on an LCD
display, and also controls valve, blower and heater operation
and sequencing.
View
Product Catalog
|
|
|
|
HEDS
Series Combination Refrigerated/Desiccant Drying Systems
Combination drying systems minimize energy requirements when
low dew point temperatures are required.
|
|
Energy
required for bed regeneration is reduced by precooling the air
stream in a refrigerated dryer.
Additional
savings are possible if the desiccant dryer can be by-passed
in the warmer months.
Let us
perform an energy cost analysis so that you can evaluate the
savings a combination system offers (typical paybacks are
1 to 1 ½ years).
View
Product Catalog
|
|
|
|
HHL
Series Heatless Regenerative Compressed Air Dryers
Dryer towers are engineered by Hankison to
produce a stable dew point, minimize purge air usage, and
protect the desiccant material.
|
 |
Hankison
HHL Series dryers produce consistent outlet pressure dew points
of -40°C and -73°C, -40°F and -100°F with
minimum purge air usage and maximum service life.
Patented
Sensatherm purge saving system matches purge air requirements
to the demand on the dryer.
Optional
mounted prefilter/afterfilter packages remove particulates
and oil aerosols from the air stream and extend the life of
the desiccant.
View
Product Catalog
|
|
|
|
HDF
Series Single Tower Desiccant Compressed Air Dryer
The HDF
Series Desiccant drying system eliminates costly painting
rework by removing damaging water, dirt and oil from compressed
air.
|
 |
- Dew
points as low as -40°F
(-40°C) can be produced.
- Includes
20% more silica gel desiccant than comparable products.
- Features
an integrated 15 micron cleanable dust filter.
- Bayonet
head to bowl connection allows for easy maintenance.
- An
optional Grade 5 prefilter with modular connection to
the dryer provides oil prefiltration, thereby extending
the life of the dryer's desiccant bed.
View
Product Catalog
|
|
|
The
HNG Series Nitrogen Generators use your compressed air system
to eliminate unsightly tanks and dewars.
|
 |
- Benefit with
nitrogen purity levels from 95% to 99.7%. Ideal for OEMS
and packagers.
View
Product Catalog
|
|
|
|
